BKWCQ - STATE SEWER SOLVENT 7
- MSDS: BKWCQ
- Manufacturer: STATE CHEMICAL MANUFACTURING CO
- Product Name: STATE SEWER SOLVENT 7
- National Stock Number: 6850-00F017589
Product Identification
Product ID:STATE SEWER SOLVENT 7
MSDS Date:12/01/1985
FSC:6850
NIIN:00F017589
MSDS Number: BKWCQ
Responsible Party
CLEVELAND, OH 44114
Emergency Phone: (216) 861-7114
Info Phone: (216) 861-7114
Cage: 53798
Contractor
Telephone: 216-861-7114
Cage: 53798
Ingredients
SODIUM HYDROXIDE (SARA III)
CAS: 1310-73-2
RTECS: WB4900000
Fraction By Weight: <50%
OSHA PEL 2 MG/M3
ACGIH TLV: C 2 MG/M3; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ALUMINUM (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: <10%
OSHA PEL 15MG/M3 DUST/5 FUME
ACGIH TLV: 10MG/M3 DUST; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION. SKIN: BURNS
DANGER: POISON.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION. SKIN: BURNS. DANGER:
POISON.
First Aid
First Aid:INGESTION: DON'T INDUCE VOMITING. DRINK PLENTY OF WATER TO
DILUTE THE CAUSTICS. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS
PERSON. EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
FLUSH W /PLENTY OF WATER. INHALATION: REMOVE TOFRESH AIR. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Unusual Fire/Explosion Hazard:AN EXOTHERMIC REACTION OCCURS IN THE
PRESENCE OF WATER. CORROSIVE SOLID.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE EQUIP. SWEEP THE EXCESS POWDER
UP & RETURN TO CONTAINER. FLUSH RESIDUE W/PLENTY OF WATER & FOLLOW
W/A MILD HYDROCHLORIC ACID RINSE TO DRAIN.
Handling
Handling and Storage Precautions:POISON. KEEP CONTAINER TIGHTLY CLOSED.
DON'T ALLOW WATER TO GET IN CONTAINER, TAKE INTERNALLY, OR WEAR
CONTACT LENSES WHEN WORKING W/PRODUCT.
Other Precautions:DON'T REUSE EMPTY DRUMS, USE IN AN ALUMINUM CONTAINER
OR MIX W/ACID OR ANY OTHER CHEMICAL. KEEP OUT OF REACH OF CHILDREN.
AVOID CONTACT W/EYES, SKIN, CLOTHING & BREATHING DUSTS/FUMES. THE
HEAT GENERAT ED MAY DISTORT PLASTICS (PVC) PIPES.
Exposure Controls
Ventilation:GENERAL
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES, FACE SHIELD
Other Protective Equipment:LONG SLEEVED SHIRT
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
FOR INDUSTRIAL USE ONLY. READ & FOLLOW ALL LABEL DIRECTIONS &
PRECAUTIONS BEFORE USING THIS PRODUCT.
Chemical Properties
Solubility in Water:COMPLETE
Appearance and Odor:RED GRANULAR POWDER W/MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS, FLAMMABLE LIQUIDS, & HALGENATED MATERIALS. MAY AFFECT SOME
PLASTICS. DON'T MIX W/OTHER CHEMICALS.
Stability Condition to Avoid:WATER FROM ENTERING CONTAINER OR USE OF
ALUMINUM CONTAINER.
Hazardous Decomposition Products:HEAT GENERATED BY OVERUSE OF THIS
PRODUCT MAY DISTORT PLASTIC (PVC) PIPES.
Disposal
Waste Disposal Methods:DISPOSE OF RESIDUE IN A CHEMICAL SANITARY
LANDFILL IN ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS.
CRUSH, DISCARD OR GIVE DRUMS TO A DRUM RECONDITIONER FOR RECYCLING.
CORROSIVE SOLID. DOT UN1759.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.